3VX560
Product Info
Gates® V-Belt, 3VX Section, 56 in Outside Length, 3/8 in Top Width, 21/64 in Thickness, 3/8 in Rib Width, 1 Ribs, Cogged, Molded Notch Construction, Polyester Reinforced, Resists: Heat, Oil, EPDM, -70 to 250 deg F
When your power transmission application needs a high horsepower solution but is constrained by drive weight or physical space, the answer is Super HC molded notch belts. Our proprietary construction process provides a superior combination of flex and load-carrying capacity, transmitting up to three times the horsepower versus comparably sized belts. Super HC MN v-belts put more power where high-speeds, high-speed ratios or small pulley diameters are required, offering significant benefits over classical section v-belts. Developed through specialized research, Super HC MN is highly recommended for use on all industrial heavy-duty, narrow section v-belt drives. With an increased transmission efficiency this belt allows for a more compact and highly economical drive design.
- Flex-bonded tensile cords are vulcanized as one solid unit making the belt highly resistant to tensile and flexing forces, fatigue and shock loads
- Precision-ground straight sidewalls give a uniform wedging action and ensure the belt fits correctly in the pulley grooves
- Molded notches reduce and evenly distribute thermal and bending stresses
- Machined belt edge provides maximum sheave groove contact for even wear and extended belt life
- Proprietary Flex-Weave cover protects the belt’s interior from oil, contaminants and heat
- Promotes smoother, quieter operation, with less slippage and belt wear
- Elastomeric compound protects the belt against heat, ozone and sunlight
- Even with severe slippage, the belt will not catch fire from heat build-up
- Designed for high horsepower, space-constrained applications
- Improved belt life reducing expensive maintenance time
- Optimally constructed for small sheave diameter drives
- The molded notch pattern also reduces noise
- Patented ethylene material construction
- More compact design compared to classical section v-belts
- Cost and space savings by reducing size of pulleys, bearings, guards and mounts
- Match system: All sizes meet Gates UNISET tolerances, they can be installed without matching
Item Specifications
-
Cogged, Molded Notch
-
EPDM
-
1
-
56 in
-
Polyester
-
Heat, Oil
-
3/8 in
-
3VX
-
-70 to 250 deg F
-
21/64 in
-
3/8 in