5VX950
Product Info
Gates® Super HC® V-Belt, 5VX Section, 95.42 in Outside Length, 0.59 in Top Width, 0.53 in Thickness, 1 Ribs, Cogged Construction, EPDM, -30 to 60 deg C
When your power transmission application needs a high-horsepower solution but is constrained by drive weight or physical space, the answer is Super HC® molded notch belts. Our proprietary construction process provides a superior combination of flex and load carrying capacity, transmitting up to three times the horsepower versus comparably sized belts. Super HC® MN V-belts put more power where high-speeds, high-speed ratios or small pulley diameters are required, offering significant benefits over classical section V-belts. Developed through specialized research, Super HC® MN is highly recommended for use on all industrial heavy-duty, narrow section V-belt drives. With an increased transmission efficiency this belt allows for a more compact and highly economical drive design.
- Flex-bonded tensile cords are vulcanized as one solid unit making the belt highly-resistant to tensile and flexing forces, fatigue and shock loads
- Precision-ground straight sidewalls give a uniform wedging action and ensure the belt fits correctly in the pulley grooves
- Molded notches reduce and evenly distribute thermal and bending stresses
- Machined belt edge provides maximum sheave groove contact for even wear and extended belt life
- Proprietary Flex-Weave® cover protects the belt’s interior from oil, contaminants and heat
- Promotes smoother, quieter operation, with less slippage and belt wear
- Elastomeric compound protects the belt against heat, ozone and sunlight
- Even with severe slippage, the belt will not catch fire from heat build-up
- Designed for high horsepower, space-constrained applications
- Improved belt life reducing expensive maintenance time
- Optimally constructed for small sheave diameter drives
- The molded notch pattern also reduces noise
- More compact design compared to classical section V-belts
- Cost and space savings by reducing size of pulleys, bearings, guards and mounts
- All sizes meet Gates UNISET tolerances, they can be installed without matching
Item Specifications
-
Cogged
-
EPDM
-
1
-
95.42 in
-
5VX
-
-30 to 60 deg C
-
0.53 in
-
0.59 in
-
0.95 lbs per