4/5V1800
Product Info
Gates® Super HC® PowerBand® V-Belt, Series: 9386 Series, 5V Section, 180 in Outside Length, 0.61 in Top Width, 0.6 in Thickness, 40 deg Angle, 4 Ribs, Resists: Fatigue, Flexing Force, Shock, Tensile, Neoprene, -22 to 140 deg F, For Use With: Super HC® Sheaves
When uptime is a must, equip your drives with Gates® Super HC® PowerBand® belts. Super HC® PowerBand® belts offer a solution for drives where single belts vibrate, turn over or jump off the pulleys. With a superior combination of flex and load, the PowerBand® construction consists of multiple V-belts joined together by a permanent, high-strength tie band that functions as a single unit. This means a tougher, more stable solution with even load distribution and each strand fitting securely in the sheave-groove.
- Highly resistant to tensile and flexing forces, fatigue and shock loads
- High stability and smooth running on the toughest drives
- Flex-bonded tensile cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration
- Flex-Weave® cover is a patented fabric construction for longer life, providing extended protection to the belt core from oil, dirt and heat
- Concave sidewalls provide proper cord support and full contact with the sheave-groove for equal loading and uniform wear
- Gates® curves provide full contact with pulley grooves for uniform loading of cords, uniform wear and increased belt life
- The tie band assures high-lateral rigidity, guiding the belt in a straight line and preventing it from coming off the drive
- Strong band controls belt-to-belt distance and prevents sideways bending
Item Specifications
-
40 deg
-
Neoprene
-
4
-
180 in
-
Fatigue, Flexing Force, Shock, Tensile
-
5V
-
9386 Series
-
Super HC®
-
Sheaves
-
-22 to 140 deg F
-
0.6 in
-
0.61 in
-
12.30 lbs per