A26
Images may differ in appearance from the actual product.
Item #:
A26
Product Info
Gates®
Gates® Hi-Power® II V80® V-Belt, A Section, 28 in Outside Length, 0.53 in Top Width, 0.34 in Thickness, 37 deg Angle, 1 Ribs, Resists: Aging, Heat, Oil, Ozone, Slippage, Sunlight, Weather, EPDM Rubber, -22 to 140 deg F
The wrapped classical section Hi-Power® V-belt has a long reputation for reliability on agricultural and industrial applications. The arched top of the Hi-Power® belt provides superior strength to prevent “dishing” and distortion of the tensile section. The cords are properly aligned, each of them carrying its full share of the load.
- Arched top, concave sidewalls and rounded corners provide uniform tensile loading and uniform pulley sidewall contact for excellent belt service life and reduced pulley wear
- The vulcanized Flex-bonded tensile cords provide superior resistance to tensile and flexing forces, fatigue and shock loads
- The flex weave oil and heat-resistant cover protects the belt core from the toughest environments
- Flex-bonded cords are strongly bound to the body of the belt, resulting in equal load distribution and absorption of bending stress without cord deterioration
- Gates® curves provide proper cord support and full contact with the sheave-groove for uniform loading, uniform wear and increased belt life
- The Flex-Weave® cover is constructed for longer cover life, providing extended protection to the core of the belt from oil, dirt and heat
- Static conductive (ISO 1813) and can as such be used in the conditions described in the directive 2014/34/EU- ATEX
- Belt edge is machined for even sheave groove contact, resulting in smoother running and less slip and wear
- All sizes meet Gates UNISET tolerances, they can be installed without matching
- Meets RMA oil and heat-resistant standards and static conductivity requirements
- High quality rubber compound protects the belt against heat, ozone and sunlight
- The belt will not catch fire from heat buildup, even with severe slippage
- Long belt life reducing replacement and maintenance costs
- Excellent performance/cost ratio
- Reliability and efficiency
Item Specifications
-
37 deg
-
EPDM Rubber
-
1
-
28 in
-
Aging, Heat, Oil, Ozone, Slippage, Sunlight, Weather
-
A
-
-22 to 140 deg F
-
0.34 in
-
0.53 in
-
0.17 lbs per