BX58
Images may differ in appearance from the actual product.
Item #:
BX58
Product Info
Gates®
Gates® Tri-Power® Molded Notch Heavy-Duty V-Belt, BX Section, 60.85 in Outside Length, 0.62 in Top Width, 0.44 in Thickness, 40 deg Angle, 61.09 in Pulley Diameter, 1 Ribs, Cogged, Raw Edge Construction, Resists: Contaminant, Fatigue, Flexing Force, Heat, Oil, Shock Load, Tensile, Rubber, -58 to 248 deg F
Gates® Tri-Power® V-belt is built for superior performance on heavy duty drives of classical cross-section. The raw edge construction and special notch design makes the Tri-Power® belt especially suited for drives requiring small diameter pulleys and back idlers. The patented ethylene EPDM compound construction allows the belt to resist cracking and handle extreme temperatures.
- Belt edge is machined for even sheave groove contact, resulting in smoother running, less slip and wear
- Cross oriented fiber loaded rubber compound for flexibility and stability
- Perfect belt for imperfect conditions – over time, belts fail from heat cracks, stretching or excessive wear
- Belt retensioning and replacement leads to downtime, inefficiency and loss of productivity
- Only Gates® molded notch V-belts, including our Tri-Power® molded notch belt line, offer a patented, new ethylene construction to keep your operations running when other belts fail
- Flex-bonded tensile cords are strongly forged to the body of the belt, resulting in equal load distribution with absorption of bending stress and separation without cord deterioration
- Notches molded into the belt during manufacturing increase flexibility, making this belt well suited for drives with smaller diameter sheaves
- Tri-Power® belts are available in AX, BX and CX sizes
- Equipped for your operating environment – featuring a composite, multi-purpose construction, Gates® heavy duty Tri-Power® belts resist oil, heat, contaminants, tensile and flexing forces, fatigue and shock loads
- We’ve even engineered our proprietary EPDM belt material to combat self-igniting, meaning your belt won’t catch fire from heat build-up, even with severe slippage
- Suitable for all industrial applications, particularly where small or sub-minimal sheave diameters are required
- 15% capacity increase over wrapped belts
- Meets ARPM/RMA IP-3-2 oil and heat-resistant standards
- Meets ARPM/RMA IP-3-3 static conductivity requirements
Item Specifications
-
40 deg
-
Cogged, Raw Edge
-
Rubber
-
1
-
60.85 in
-
61.09 in
-
Contaminant, Fatigue, Flexing Force, Heat, Oil, Shock Load, Tensile
-
BX
-
-58 to 248 deg F
-
0.44 in
-
0.62 in
-
0.55 lbs per